home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
QRZ! Ham Radio 4
/
QRZ Ham Radio Callsign Database - Volume 4.iso
/
digests
/
digital
/
940191.txt
< prev
next >
Wrap
Internet Message Format
|
1994-11-13
|
7KB
Date: Sun, 12 Jun 94 04:30:18 PDT
From: Ham-Digital Mailing List and Newsgroup <ham-digital@ucsd.edu>
Errors-To: Ham-Digital-Errors@UCSD.Edu
Reply-To: Ham-Digital@UCSD.Edu
Precedence: Bulk
Subject: Ham-Digital Digest V94 #191
To: Ham-Digital
Ham-Digital Digest Sun, 12 Jun 94 Volume 94 : Issue 191
Today's Topics:
AMIGANOS 2.9n source?
Another "What should I buy?" post
C50 DSK Bug Report (2 msgs)
Linux jnos problems
Numerically Controlled Oscillators
PAKET 5.1
Wimpy AFSK Output TS-450S
Send Replies or notes for publication to: <Ham-Digital@UCSD.Edu>
Send subscription requests to: <Ham-Digital-REQUEST@UCSD.Edu>
Problems you can't solve otherwise to brian@ucsd.edu.
Archives of past issues of the Ham-Digital Digest are available
(by FTP only) from UCSD.Edu in directory "mailarchives/ham-digital".
We trust that readers are intelligent enough to realize that all text
herein consists of personal comments and does not represent the official
policies or positions of any party. Your mileage may vary. So there.
----------------------------------------------------------------------
Date: 10 Jun 1994 23:00:58 GMT
From: agate!howland.reston.ans.net!europa.eng.gtefsd.com!newsxfer.itd.umich.edu!nntp.cs.ubc.ca!unixg.ubc.ca!quartz.ucs.ualberta.ca!tribune.usask.ca!herald.usask.ca!hardie@ames.arpa
Subject: AMIGANOS 2.9n source?
To: ham-digital@ucsd.edu
Does anybody out there know of an anonymous FTP site that has the V2.9n
source code for John Heaton's AmigaNOS? The latest I can find is V2.9k.
Thanks.
Pete Hardie
ve5va.qrp@usask.ca
--
ve5va.qrp@usask.ca
------------------------------
Date: 11 Jun 94 17:24:46 GMT
From: meaddata!skyline.dayton.oh.us!dem@uunet.uu.net
Subject: Another "What should I buy?" post
To: ham-digital@ucsd.edu
With all the recent talk about getting TCP/IP on the air by making
an old 286 with NOS a router, I'm inspired to give it a shot. But I
know little about the cards referred to in recent posts that were said
to be much cheaper than full-blown TNCs.
Can anyone provide a recommendation for such a card? Hopefully one
that doesn't require an obscure NOS variant to operate. I assume
these cards are basically like TNCs, but only with KISS mode.
Any recommendations and enlightenment appreciated. Thanks.
--
David Myers dem@skyline.dayton.oh.us
Dayton, Ohio dem@meaddata.com
------------------------------
Date: Thu, 9 Jun 1994 21:47:35 GMT
From: ihnp4.ucsd.edu!agate!iat.holonet.net!vectorbd!jpll@network.ucsd.edu
Subject: C50 DSK Bug Report
To: ham-digital@ucsd.edu
After days of a few of us new owners struggling to get our C50 DSK's
going, we decided to call TI. The tools worked OK, the Loader alone
did not.
It seems that that EXE was compiled under OS/2 and will not run under
"plain" ms-dos.
Jason Chyan advises that a new EXE will be on the TI BBS in a "few weeks".
Oh well.....
--
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-Jim Lill- Vector Board BBS
jpll@vectorbd.com 716-544-1863/2645
wa2zkd@wb2psi.#wny.ny.usa.na GEnie: ZKD
------------------------------
Date: Sat, 11 Jun 94 23:44:20 -0500
From: news.delphi.com!usenet@uunet.uu.net
Subject: C50 DSK Bug Report
To: ham-digital@ucsd.edu
Does this bug cause the system to report an "Error Code 3" error message?
The supplied application programs seem to work fine but the C26 DSK programs
for doing DSP modems also had reported error messages.
------------------------------
Date: Sat, 11 Jun 1994 03:21:23 GMT
From: ihnp4.ucsd.edu!agate!howland.reston.ans.net!gatech!newsxfer.itd.umich.edu!zip.eecs.umich.edu!umn.edu!csus.edu!netcom.com!chuckk@network.ucsd.edu
Subject: Linux jnos problems
To: ham-digital@ucsd.edu
I've just downloaded the new Linux Jnos from ftp.uscd.edu and got a bunch
of new errors during the compile. It's Linux 1.0.8. Anybody else getting
errors? I've yet to look into it in more detail. Pointers and help
appreciated.
Chuck
--------------------------------------------------------------------
chuck%wa7oef@nsd.3com.com
--------------------------------------------------------------------
Distribution: usa
------------------------------
Date: Sun, 12 Jun 1994 00:25:13 GMT
From: ihnp4.ucsd.edu!library.ucla.edu!csulb.edu!csus.edu!netcom.com!pasha@network.ucsd.edu
Subject: Numerically Controlled Oscillators
To: ham-digital@ucsd.edu
I just acquired a bunch of numerically controlled
oscillator and DDS hardware in various unknown states.
Among the parts represented are the DRFS-2250, the
TRW TDC1012J, a PC board called the DRFS-PCHPE, a
PC board called the DRFS-DX 2070, etc. Any of this
stuff sound familiar? I need technical data.
------------------------------
Date: Fri, 10 Jun 1994 18:43:04 GMT
From: lll-winken.llnl.gov!fnnews.fnal.gov!gw1!nntpa!lena!jkbe@ames.arpa
Subject: PAKET 5.1
To: ham-digital@ucsd.edu
wb7cky@vnet.ibm.com wrote:
: Several of us here in Tucson have stopped using PAKET 5.1 because it
: seems to have a difficult time coexisting with BBS's that forward
: messages in a compressed format. PAKET will switch from user 1 to 2
: to 3 and to 4 while in MONITOR mode. I was surprised that all of
: that non-ASCII data would have an affect on the program but it
: apparently does. Everything is great until the BBS's start their
: forwarding and then all heck breaks loose. I can be watching the
: monitored data in the first window and then suddenly nothing is
: happening except that I can see the counter for one of the other
: windows start stepping up indicating that window has nn bytes of unread
: data. Has anyone else experienced this?
I would try changing the SwitchStream parameter in the TNC and in the
paKet configuration menu. Also, if your TNC supports ChangeDouble I
would us it. Sorry if I have the TNC parameter names incorrect, I'm
just trying to recall them from memory.
What program have you switched back to?
John, WB3ESS
------------------------------
Date: 11 Jun 1994 22:01:07 -0500
From: ihnp4.ucsd.edu!usc!cs.utexas.edu!geraldo.cc.utexas.edu!austin.lockheed.com!kestrel.austin.lockheed.com!not-for-mail@network.ucsd.edu
Subject: Wimpy AFSK Output TS-450S
To: ham-digital@ucsd.edu
Help! I am having AFSK packet and RTTY output power problems with my Kenwood
TS-450S/AT in digital modes. I have it interfaced with a PK-232MBX. The
interface seems to be right, however, I cannot get anything other than a few
(15 to 20) watts of SSB power. The MIC gain has little effect and I cannot
overdrive the ALC. In the CW key-down, the rig puts out near 100 watts. It is
just wimpy in the digital modes. Turning up the AFSK output on the PK-232 has
little effect. Any suggestions will be appreciated.
73/Dick, KD5VU Austin, Texas
KD5VU @ N5LJF.#AUS.TX.USA.NA
kd5vu@kd5vu.ampr.org [44.76.1.40]
kd5vu@austin.lockheed.com
------------------------------
End of Ham-Digital Digest V94 #191
******************************